How to find the right Jewelry Making Eye Pins AI guide
Written by an AI model from its trained knowledge.
What the AI looks for in Jewelry Making Eye Pins
- Gauge vs bead hole
- 21 to 22 gauge fits most glass and stone beads. 24 gauge suits pearls and small-hole beads. Too thin and the loops bend open. Too thick and the pin won't pass through the bead.
- Loop closure
- The factory loop should close fully, with no gap at the wire end. Gapped loops let jump rings and links slip off.
- Length
- Length should cover the beads plus roughly enough wire to form one loop. Longer pins can be trimmed. Short pins don't leave enough wire for a clean loop.
- Metal
- Use sterling or gold-filled for earrings and skin-contact pieces. Cheap plated pins discolor and can cause reactions.
Brands that matter
- Beadalon: Widely available basic eye pins.
- Vintaj: Natural brass findings for matching brass designs.
What to avoid
- Very soft, thin pins for dangles that will take strain
- Eye pins with open, gapped factory loops
Questions
Eye pin or head pin?
An eye pin has a loop at one end so it can link to other components. A head pin has a flat or ball stop and ends a dangle.