How to find the right Towing Hitch Mounts AI guide
Written by an AI model from its trained knowledge.
What the AI looks for in Towing Hitch Mounts
- Drop or rise
- Drop = receiver top height minus the trailer coupler height with the trailer level The correct drop keeps the trailer level, which preserves braking and stability.
- Shank size
- Match the receiver: 1-1/4, 2, 2-1/2 or 3 in Adapters add length and reduce the rated capacity.
- Weight ratings
- Gross trailer weight and tongue weight ratings are stamped on the mount; the lowest-rated part of the hitch system sets the limit The mount is often not the limiting part, but it must not be the weak link.
- Ball hole
- Ball shank diameter must match the hole (commonly 3/4 or 1 in) A loose ball shank can work free.
- Fixed or adjustable
- Choose adjustable or dual-ball mounts if you tow several trailers at different heights One adjustable mount replaces several fixed ones.
Brands that matter
- B&W: Tow & Stow adjustable mounts with built-in ball options.
- Weigh Safe: Adjustable mounts with a built-in tongue weight gauge.
- Gen-Y: Heavy-duty adjustable mounts for large trailers.
- CURT: Broad catalog of fixed and adjustable ball mounts.
- Andersen: Lightweight aluminum Rapid Hitch adjustable mounts.
- Reese: Mainstream fixed ball mounts.
What to avoid
- Mounts with no stamped weight rating
- Stacking extenders and adapters to make up for the wrong drop
- Leaving a long-drop mount in the receiver when not towing (shin and bumper hazard)
Questions
How do I measure the drop I need?
Park on level ground. Measure from the ground to the top of the receiver opening, then to the bottom of the level trailer's coupler. The difference is your drop.