How to find the right Powersports Handlebar Accessories AI guide
Written by an AI model from its trained knowledge.
What the AI looks for in Powersports Handlebar Accessories
- Handlebar diameter
- Standard bars are 7/8 in (22 mm) and oversize or 'fat' bars are 1-1/8 in (28.6 mm). Many Harley-style bars are 1 in. Buy clamps for your diameter. This is the most common reason handlebar accessories don't fit.
- Bar-end compatibility
- Check the bar's inner diameter and whether it is solid or hollow before buying bar-end weights or hand-guard end mounts. End fittings are specific to the inner diameter and won't secure in the wrong bar.
- Hand-guard type
- Use wraparound guards with aluminum backbones for trail and woods riding. Plastic roost deflectors are suitable for motocross only. Only full-wrap guards protect your levers and hands from impacts with trees and rocks.
- Control clearance
- Confirm that mounts don't interfere with the throttle tube, switch housings or full steering lock. Restricted steering or a sticking throttle is a safety hazard.
- Mount vibration damping
- Use damped or rubber-isolated phone and GPS mounts on single-cylinder and vibrating engines. Vibration is known to damage phone camera stabilization systems.
Brands that matter
- RAM Mounts: Modular ball-mount system for phones and GPS units.
- Barkbusters: Aluminum-backbone wraparound hand guards.
- Cycra: Wraparound and MX hand guards.
- Acerbis: Hand guards and plastic protection.
- Renthal: Bars, grips and bar pads.
- ODI: Lock-on grip systems.
What to avoid
- Clamps sized for the wrong bar diameter, used with shims.
- Rigid phone mounts on high-vibration bikes.
Questions
How do I tell if I have fat bars?
Measure at the clamp. Oversize bars are about 28.6 mm there and taper to 22 mm at the controls, whereas standard bars are 22 mm throughout.