How to find the right Titanium Rods AI guide
Written by an AI model from its trained knowledge.
What the AI looks for in Titanium Rods
- Bar specification
- ASTM B348 grade stated (Grade 2 or Grade 5 most common); AMS 4928 for aerospace Ti-6Al-4V bar These specs define the chemistry, mechanical properties and tolerances for titanium bar.
- Diameter tolerance and straightness
- Diameter tolerance is stated. Choose centerless-ground or precision-ground rod when it must fit bearings or bores without machining. As-rolled rod is often oversized and out of round, so you must leave stock to turn down.
- Machinability planning
- Order enough length to hold the part in the chuck plus cutoff allowance. Plan on sharp carbide tooling, low speed and flood coolant. Titanium conducts heat poorly and galls, so dull tools and dry cutting cause work hardening and fire risk from chips.
- Surgical or jewelry use
- Requires ASTM F136 (Grade 23) or F67 (CP) with certification Ordinary industrial Grade 5 is not certified for body contact.
What to avoid
- Rod listed only by diameter with no grade
- "Titanium" rods that are attracted to a magnet, which indicates steel
- Using fine titanium chips or swarf near ignition sources