How to find the right Jack Accessories AI guide
Written by an AI model from its trained knowledge.
What the AI looks for in Jack Accessories
- Jack stands
- Buy stands rated as a pair above the load they will hold, compliant with ASME PASE, ideally with a secondary locking pin. The stands, not the jack, are what keep you alive under a vehicle.
- Saddle and pinch-weld pads
- The pad must match your jack's saddle diameter or cup shape and suit the vehicle's lift point (slotted for pinch welds). Wrong pads slip off or crush rocker seams.
- Hydraulic oil
- Use only hydraulic jack oil. Brake fluid, motor oil and ATF can swell seals or cause foaming.
- Replacement parts
- Match handles, seal kits and release valves to the jack brand and exact model. Jack handle sockets and seal sizes are not standardized.
- Trailer jack accessories
- Caster wheels and foot plates must match the tongue jack's tube diameter and pin pattern. Tongue jack tubes vary by brand and capacity.
Brands that matter
- Hein-Werner: Stands and seal kits for its own jacks.
- Torin / Big Red: Inexpensive jack stands and pads.
- Sunex: Shop jack stands.
- Hi-Lift: Bases, lift-mates and handle keepers for high-lift jacks.
- Curt: Tongue jack wheels and foot plates.
What to avoid
- Stands recalled or with a ratchet that can disengage, so check for any recall on the model before buying
- Generic hockey-puck pads that do not seat in your saddle
- Using bricks or wood scraps in place of rated stands
Questions
Do I need jack stands if my floor jack is rated well above the car's weight?
Yes. The jack's rating covers lifting, not holding, and seals can bleed down, so always support the load on rated stands.