How to find the right Skateboard Hardware AI guide
Written by an AI model from its trained knowledge.
What the AI looks for in Skateboard Hardware
- Bolt length
- Use about 7/8 inch with no risers, about 1 inch with 1/8 inch risers, and about 1-1/4 inch with 1/4 inch risers. Bolts must fully engage the nylon-lock nuts without sticking far out from the baseplate.
- Thread
- #10-32 bolts with nylon-insert lock nuts. This standard fits every standard deck and truck, and lock nuts resist loosening.
- Head type
- Choose Allen or Phillips to match the tool you carry. Allen heads resist stripping. Phillips works with more common tools.
- Set count
- A board needs eight bolts and eight nuts. Standard sets cover one board. Some sets include a spare bolt.
Brands that matter
- Independent: Genuine Parts hardware sets.
- Shorty's: Long-running hardware maker.
- Diamond Supply Co: Popular hardware sets, often with a colored bolt.
What to avoid
- Bolts too short to reach past the nylon in the lock nut.
- Reusing stripped nuts.
Questions
Allen or Phillips?
Neither changes performance. Pick the head that matches your skate tool.