How to find the right Archery Arrows & Parts AI guide
Written by an AI model from its trained knowledge.
What the AI looks for in Archery Arrows & Parts
- Spine matched to bow
- Use the arrow maker's spine chart with your draw weight, draw length and point weight; heavier points or longer arrows need a stiffer spine Wrong spine causes erratic flight and poor broadhead tuning that no rest or fletching change fully fixes.
- Total arrow weight
- Stay at or above the bow maker's minimum, commonly 5 grains per pound of draw weight for compounds Arrows that are too light can damage the bow and may void its warranty.
- Component diameter compatibility
- Inserts, nocks, outserts and glue-in points must match the shaft's exact inside or outside diameter and system Shaft families (standard, small, micro diameter) use different components, and parts do not interchange across them.
- Nock type
- Match the nock style to the shaft and fit it to your string, such as press-fit, pin or bushing systems A nock that is too tight or too loose on the string affects accuracy and safety.
- FOC and point weight
- Keep field points and broadheads at the same grain weight, and choose point and insert weight for the front-of-center balance you want Matched weights let you practice with field points and hunt with broadheads at the same sight settings.
Brands that matter
- Easton: Broad shaft and component catalog with clear spine charts and diameter-specific parts.
- Gold Tip: Popular hunting and target shafts with their own insert and nock systems.
- Victory Archery: Well-regarded small-diameter hunting and target shafts.
- Bohning: Standard source for vanes, fletching adhesive, nocks and fletching jigs.
- G5 Outdoors: Well-known fixed-blade broadheads and steel points.
- Bitzenburger: Long-standing precision fletching jigs for refletching arrows yourself.
What to avoid
- Mixing component systems from different shaft diameters
- Building arrows below the bow maker's minimum arrow weight
- Shooting broadheads that weigh differently from your practice points without re-sighting
- Unbranded mixed-component bundles with no stated diameter or spine
Questions
Can I put any brand's inserts or points in my shafts?
Screw-in points use the standard 8-32 thread, but inserts, outserts and nocks must match your shaft's exact diameter system, so check the shaft maker's component list.