How to find the right Furniture Back Plates AI guide
Written by an AI model from its trained knowledge.
What the AI looks for in Furniture Back Plates
- Hole spacing
- The back plate's holes must match your pull's center-to-center spacing, or be a single-hole plate for knobs Back plates are drilled for specific pull spacings.
- Coverage
- Size the plate to cover old holes or worn finish when converting between hardware spacings Hiding old holes is the main practical reason to use a back plate.
- Screw length
- Add the plate's thickness to the door thickness and buy longer screws if needed The stock screws often come up short once a plate is added.
- Finish match
- Buy the plate from the same brand and finish line as the knob or pull Finishes with the same name vary noticeably between brands.
Brands that matter
- Amerock: Back plates made to coordinate with its knobs and pulls.
- Top Knobs: Decorative back plates matched to its collections.
- Hickory Hardware: Back plates in many common spacings.
- Liberty: Budget back plates for covering old holes.
What to avoid
- Mixing finish brands between plate and pull
- Assuming the existing screws will be long enough